Technical Specifications

Operating Temperature
0-60 Degrees C
__________________________________________

Temperature Resolution
0.000001 Degrees C
_________________________________________________

Repeatability
0.1% RSD
_________________________________________________

Resolution
0.001 (MJ/Kg)
_________________________________________________

Results per hour
10 sampes per hour using two vessels
__________________________________________

Power
90 - 260 VAC

Features

• Easy to maintain, self system test for technicians
• Compact size - able to fit more systems into a standard laboratory
• Fully automatic operation - temperature readings and calculations are done for you
• Possible to network up to 7 calorimeters
• Rapid and accurate determinations
• 10 samples per hour using the CAL2k-2 Cooler and 2 vessels
• Isothermal design using a waterless patented vessel (no bucket, spillage or measuring)
• Large memory for storing more than 2000 determinations, including operating conditions and user statistics
• Automatic correction for firing wire, cotton, spikes etc
• Fully automatic calibration, with 10 stored calibrations per vessel for standard deviation
• Calibrated sensors built into vessel wall
• Can use spiking for hard to combust samples
• Intelligent "SMART" vessel with fault diagnostics and calorific processor
• Vessels are pre-programmed for 5000 determination cycles before inspection
• Adjustable firing limits set per vessel
• High and low mass limits
• Determination cycle adjustment
• Other features include user, group and sample ID
• CE Certified
• Precise and reproducible determination of gross calorific values according to ISO 1928, DIN 51900 and BS1016:105

Software Features

• User controlled access for vital and routine operations
• Automatic results retrieval for selected and formatted data
• Weigh station operation
• Calorimeter and vessel setup
• Calibration management
• Service and maintenance routines
• Filing, printing and other operator functions, including data export to common formats
• Real time graphical temperature display
• Network status display
• Grouped sample determinations and analysis

Complete CAL2k System

Complete system consists of the following:
CAL2k-1        Calorimeter
CAL2k-1-KT   Calorimeter Installation Kit
CAL2k-2        Cooler
CAL2k-2-KT   Cooler Installation Kit
CAL2k-3        Filling Station
CAL2k-3-KT   Filling Station Installation Kit
CAL2k-4        Vessel
CAL2k-4-KT   Vessel Installation Kit

Optional Extras (Recommended or Required):

It is important to note that a High Pressure Oxygen Regulator capable of filling the vessel to 3Mpa (3000Kpa, 30 bar, 30 atm) is required and must be available/supplied prior to installation of the unit.

Items to Source Locally

Balance (Recommended Satorius Balance CP64 or equivalent)
Water Tap Connection
PC with Windows 98/2000/XP/NT4.0 Installed (Required only if running software - a PC is not required to operate the unit)