Contact

Email : info@cal2k.com

Tel : +27-(0)11-792-9805

 


Cal2k on Youtube Cal2k on Facebook



WELCOME TO CAL2K

Advanced Bomb Calorimeters - Manufacturing Superb Calorimeter for today's Analytical Needs.

 

ECO CALORIMETER

Purchase the ECO Bomb Calorimeter

The ECO Bomb Calorimeter is the most affordable of the DDS Scientific product range. The ECO is the most Compact and Cost-Effective of all the models on offer. The ECO can handle 1 determination in an hour. It has been designed with the academic User in mind. It is ideal for low volume sample requirements typically found in Educational Institutions. The ECO Bomb Calorimeter System is packaged complete with : Calorimeter, Filling Station and Two Vessels.

 

The CAL2K ECO Bomb Calorimeter

The CAL2K ECO Bomb Calorimeter - Oxygen Filling Station


The CAL2K ECO Bomb Calorimeter


The Calorimeter The Filling Station

 

 


 

Specifications

 

Technical Specifications:

Operating Temperature: 0 - 60 Degrees C
Temperature Resolution 0.000001 Degrees C
Repeatability 0-1% RSD
Resolution 0.001 (MJ/Kg)
Results per hour 1 sample per hour / 8 per day
Power 90-260VAC

 

ECO Manuals

View the ECO Operating Manual V2.2

View the ECO Handbook V2

View the ECO Maintenance Manual V2

View Application Notes

 

Instruction Videos

View 3 Steps for the ECO - Instructions on how to : enter the sample weight manually, calibrate the vessel and set the un-linear factor.

Using the CAL2K ECO Bomb Calorimeter

 

View the ECO Brochure

View CAL2K Product Catalogue


 

ECO Features

 

Features:

  • Ideal for low volume application up to 1 sample per hour with one vessel. Maximum 8 samples per day
  • No water required
  • Inexpensive
  • No operator attention required during analysis, the LCD display prompts the operator and displays faults and progress
  • Uses the proven CAL2k-4 Intelligent vessel
  • Small and compact
  • Uses a standard PC keyboard (PS2)
  • Result retrieval connected to a PC, using the supplied Windows Operating Software
  • Stores 1024 results and other variables
  • Sample identification is settable and self-incrementing
  • Vessel temperature can "stream" to a PC for user spreadsheet analysis
  • Factory setup for standard operation, however some values can be changed via the keyboard
  • Can use "spiking" for hard to combust samples
  • Can connect directly to balance for mass entry, or the mass can be entered via the keyboard
  • Built in diagnostic, which is ideal for first hand diagnostic
  • Vessels are pre-programmed for 5000 determination cycles before inspection
  • External power supply for 9 Volts, 100mA is supplied
  • Works in BTU/lb, Calories/grams or MJ/Kg

 

Using the ECO Bomb Calorimeter

Filling the CAL2K-4 Vessel with Oxygen

 


 

THE COMPLETE ECO SYSTEM AND EXTRAS

Complete ECO System:

 


The Complete CAL2K ECO Bomb Calorimeter

 

The complete system consists of the following :

  • ECO - Calorimeter
  • ECO-KT - Calorimeter Installation Kit
  • CAL2k-3 Filling Station
  • CAL2k-3-KT Filling Station Kit
  • CAL2k-4 Vessel
  • CAL2k-4-KT Vessel Installation Kit

 

Optional Extras:


It is important to note that a High Pressure Oxygen Regulator capable of filling the vessel to 3Mpa (3000Kpa, 30 bar, 30 atm) is required and must be available/supplied prior to installation of the unit.

Items to source locally:

  • Balance (Recommended Satorius Balance CP64 or equivalent)
  • PC with Windows 98/2000/XP/NT4.0 Installed (Required only if running software - a PC is not required to operate the unit)

 

 


 

THE ECO SYSTEM

 

The CAL2K ECO Bomb Calorimeter

The Calorimeter

A small, desktop apparatus, in a warm buttercup yellow. It performs the temperature analysis of a sample. The operator, balance, vessel and PC interface together. Is is insulated against ambient temperature changes via an "air barrier" and polystyrene. The ambient temperature is measured. It "fires" the sample by heating the firing wire inside the vessel.

 

The ECO has been designed for the low volume market and is most suitable for customers running less than 8 CV samples per day.

The CAL2K ECO Bomb Calorimeter - Vessel

The Vessel

The CAL2k-4 vessel is the first of its kind and is the heart of the CAL2K system. Its sophisticated design allows the temperature to be measured to five decimal places in degrees Celsius. The vessel is an intelligent (SMART) vessel with a microprocessor built into its base. The vessel is capable of : firing counts, identification, memory and reconditioning data.

 

The vessel is the combustion chamber. It is made of stainless steel and tested up to a pressure of 300 atmospheres (4200psi).

The CAL2K ECO Bomb Calorimeter - Oxygen Filling Station

The Filling Station

 

The filling station is designed to fill the vessel with oxygen to 3Mpa. The filling rate is controlled so as not to disrupt the sample in the crucible. The Filling Station is extremely easy to operate and requires minimal adjustments and maintenance.

 

 


 

 

Downloads


DOWNLOAD THE ECO BROCHURE 2013

Download the ECO Operating Manual