Technical
Specifications
Operating Temperature
0 - 60
Degrees
C
________________________________________
Temperature
Resolution
0.000001 Degrees
C
________________________________________
Repeatability
0-1%
RSD
________________________________________
Resolution
0.001
(MJ/Kg)
________________________________________
Results per hour
1 sample per
hour / 8 per
day
________________________________________
Power
90-260VAC
Features
-
Ideal for low volume application up
to 1 sample per hour with one vessel. Maximum 8 samples per day
-
No water required
-
Inexpensive
-
No operator attention required
during analysis, the LCD display prompts the operator and displays faults and
progress
-
Uses the proven CAL2k-4 Intelligent
vessel
-
Small and compact
-
Uses a standard PC keyboard
(PS2)
-
Result retrieval connected to a PC,
using the supplied Windows Operating Software
-
Stores 1024 results and other
variables
-
Sample identification is settable
and self-incrementing
-
Vessel temperature can "stream" to a
PC for user spreadsheet analysis
-
Factory setup for standard
operation, however some values can be changed via the keyboard
-
Can use "spiking" for hard to
combust samples
-
Can connect directly to balance for
mass entry, or the mass can be entered via the keyboard
-
Built in diagnostic, which is ideal
for first hand diagnostic
-
Vessels are pre-programmed for 5000
determination cycles before inspection
-
External power supply for 9 Volts,
100mA is supplied
-
Works in BTU/lb, Calories/grams or
MJ/Kg
Complete ECO
System
Complete system consists of the
following:
ECO
Calorimeter
ECO-KT
Calorimeter Installation
Kit
CAL2k-3 Filling
Station
CAL2k-3-KT Filling Station
Kit
CAL2k-4
Vessel
CAL2k-4-KT Vessel Installation
Kit
Optional Extras (Recommended or
Required):
REGULATOR High Pressure
Oxygen Regulator (Required and MUST be supplied before installation)
It is
important tonote that a High Pressure Oxygen Regulator
capable of filling the vessel to3Mpa (3000Kpa, 30
bar, 30 atm) is required and must be available/supplied prior to
installation of the unit.
