Digital Data Systems supplys both the accessories, spare parts and consumables for all 3 "dry" static jacket isothermal bomb calorimeter models. The consumables and accessories are the same for all 3 models making it easier when ordering. Below are the accessories required to run the bomb calorimeter systems, these are the CAL2k-2 Cooler, CAL2k-3 Filling Station and the CAL2k-4 Vessel. Consumables such as o-rings, firing wire, firing cotton, electrodes etc., are readily available from dds and our agents, please contact us for a detailed list and pricing.

DDS is proud to introduce our new certified Benzoic Acid tablets. We are now offering certified tablets as part of our consumable list. The tablets are sold in bottles of 50 x 0,5g tablets less than $25.00 per bottle . Please contact us or your nearest agent should you wish to purchase these tablets. Benzoic Acid is used for calibration and standardization of bomb calorimeter systems.

The CAL2k-2 Cooling unit is designed to reduce the temperature of a recently fired vessel, obtained from the calorimeter, to ambient temperature. Solid state cooling is used and the hot junction of the peltier elements is cooled by a continous trickle from the mains water supply.

CAL2k-2       Cooler
CAL2k-2-KT  Cooler Installation Kit
Kit includes:
3 water pipe hose clamps, 1 cable, 10 meters of water pipe and a mains cable

The filling station is designed to fill the vessel with oxygen to 3000Kpa (3Mpa). The filling rate is controlled so as not to distrub the sample inside the crucible. The filling station is extremely easy to operate and requires minimal adjustments and maintenance.

CAL2k-3        Filling Station
CAL2k-3-KT    Filling Station Installation Kit
Kit includes:
2 flow ajustors, 5 nozzle o-rings, 2 high pressure pipes (1m), 1 oxygen regulator, 1 defiller cap,
1 handling hook

The CAL2k-4 Vessel is the first of its kind and is the heart of the calorimeter system. Its sophisticated design allows the temperature to be measured to five decimal places in degrees celsius. The vessel is an intelligent (SMART) vessel with a microprocessor built into its base. The vessel is capable of storing firing counts, identification, results, memory and reconditioning data all it's memory.

CAL2k-4       Vessel
CAL2k-4-KT   Vessel Installation Kit
Kit includes:
1 centre electrode, 10 top & bottom o-rings, 5 lid o-rings, 1 outside electrode, firing wire and 1 deflector plate

A supply of oxygen at a pressure of 3.0Mpa (30 bar) (3000Kpa) within 10 meters of the bomb calorimeter system is required. A suitable pressure regulator must be supplied to allow for this high pressure. DDS can supply a suitable regulator at an additional cost or this item should be sourced locally by the agent or customer. However it is important to note that this item is VITAL and MUST be available/supplied before installation of the unit. Without the high pressure regulator you will NOT be able to operate the system.